Filter
Top Products
55
Chapter
2
File
Menu
910
File – Import – Digitizer – One Scan (When VIVID 910 is Selected)
14
Click the [OK] button.
The data displayed in the element view win-
dow by the Store function will remain as is.
12
Click on the [Store] button.
• This step is not necessary if the [Auto Store]
checkbox has been checked.
The data displayed in the Work window area
will appear in the Store window area. If the
corresponding points have been properly des-
ignated, all the stored data will be displayed
in 3-D in the element view window after it is
registrated and three-dimensionalized.
• If [Save Raw Data] checkbox in [File-Import
-Digitizer-One Scan-Option] dialog box has been
checked, [Save As] dialog box will be displayed.
The data will be saved as a CDM le.
q Enter the desired le name.
w Click the [Save] button.
Note
Thelenamemustconsistofalphanumericcharacters
only.
• Clicking on the [Cancel] button will delete the
elements that were displayed in the store window
when the [Store] button is clicked at the end of
execution of this command.
13
Repeat Steps 9 to 12 until the desired
corresponding points are designated.
1
2