Konica Minolta VIVID 300 Universal Remote User Manual


 
191
Chapter
2
Build
Menu
9i
910
900
700
300
Build – Move – To Origin
Moving the Element(s) to the Origin
This command is used to move the selected element(s) to the origin.
Operating Procedure
1
From the element list, select the desired
element(s).
2
From the [Build] menu, select [Move]
and then click [To Origin].
The selected element(s) will move in such a
way that the center of gravity of all the con-
stituent points is located at the origin.
The selected element will be ready to be dis-
played in all windows. It will be displayed if
it is not displayed in the active window or the
windows for which all the elements are set to be
displayed.