Konica Minolta VIVID 300 Universal Remote User Manual


 
148
Chapter
2
View
Menu
9i
910
900
700
300
View – Orbit [O] (Effective while held down)
Rotating / moving camera (view point) position
This command is used to rotate the camera at the point of interest. In addition, camera position can also be
moved (dragged).
M
emo
Use of a mouse equipped with wheel function enables screen zoom-in/-out by turning the wheel.
Note
• Thiscommandiseffectiveonlyforthe“Isometric”or“Perspective”elementviewwindow.
• View–Orbitmodewillbeactivewhenthiscommandisselected.TocanceltheView–Orbitmode,executetheView–Orbit
commandagain.However,ifyouareexecutingthiscommandusingtheshortcutkey,theView–Orbitmodecanbecan-
celedbyreleasingthekey.
Left : Rotates the camera in the desired direction.
Middle ([Shift] + Left) : -
Right : Moves the camera position (Drags Camera).
* Enables screen zoom-in/-out by turning the wheel.
Operating Procedure
1
Click [Orbit] on the [View] menu.
2
Drag the item in an element view win-
dow while holding down the left mouse
button.
The element will rotate in the direction it is
dragged.
Camera position can be moved while holding
down the right mouse button and dragging. Use
of a mouse equipped with wheel function enables
screen zoom-in/-out by turning the wheel.
Dragging while holding down the right button
will move the camera position.
M
emo
Element will be displayed in simple form while camera
position is moved (dragged). It will be displayed in de-
tailed form when dragging is canceled.