Konica Minolta VIVID 300 Universal Remote User Manual


 
76
Chapter
2
File
Menu
900
910
File – Import – Digitizer – One Scan (When VIVID 900/910 is Selected)
10
Click the [OK] button.
The scanned image will be displayed. The
names of the imported elements will also
appear in the element list, indicating that the
elements have been selected (highlighted).
The loaded data will be ready to be displayed in
all windows. It will be displayed in the active
window and the windows for which all the ele-
ments are set to be displayed.
When the data is loaded for the rst time after
the software is started, it will be fully framed in
all the windows including those that are hidden
automatically.
If the [Save CDM] checkbox was checked at step
9, the [Remote-Save] dialog box will appear.
q Enter the desired le name.
w Click the [Save] button.
Note
Thelenamemustconsistofalphanumericcharacters
only.
9
Enter the desired element name, and
set parameters.
Select the desired rate from “1/1”, “1/4”, “1/9”,
“1/16” and “No polygon” by selecting from the
[Reduction Rate] pull-down menu.
If you want to generate points to ll in holes
caused by missing data, set the [File Holes] set-
ting to “On”.
The [Remove] pull-down menu lets you select
which points to remove from the imported data.
You can set this to any of the following: “None”,
“Boundary(B.)”, “5deg. & B.”, “10deg. & B.”,
“15deg. & B.”, or “20deg. & B.”
If you want to lter the imported data, select the
appropriate parameter from the [Filter] pull-down
menu.
To save the raw scan data (.cdm) when importing
data, check the [Save CDM] checkbox.
Note
Theelementnamemustconsistofupto31characters.