Konica Minolta VIVID 300 Universal Remote User Manual


 
173
Chapter
2
Edit
Menu
9i
910
900
700
300
5
Repeat step 4 until six or more pairs of
corresponding points are designated.
The order of designating points in the rst and
second image windows for the rst pair can
differ from that for the second pair.
M
emo
For satisfactory registration of the images, approximately
12 pairs of corresponding points must be designated.
6
To delete a pair of corresponding
points, click either of those points with
the left mouse button while holding
down the [Shift] button.
The pair of corresponding points will be de-
leted.
Even when designating corresponding points,
they can be deleted by clicking with the left
mouse button while holding down the [Shift] but-
ton.
An alarm will be heard if a point other those
designated is clicked with the left mouse button
while holding down the [Shift] button.
7
Click the [Preview] button.
A temporary window will appear, showing the
preview image.
The temporary window is a Perspective view, and
is displayed in texture mapping mode.
Dragging while holding down the left mouse
button inside the preview window will rotate the
camera.
Note
• Anerrormessagewillappearifonlyveorlesspairs
ofpointshavebeendesignated.
• Anerrormessagewillappearifcalculationcannotbe
madebasedonthedesignatedpoints.
M
emo
If registration is not satisfactory, designate more cor-
responding points or delete unsatisfactory corresponding
points.
8
Click the [OK] button.
A new image will be added to the element.
All the image windows, [Point Set] dialog box
and the temporary window (if it is open) will
close, and the [Edit-Image] dialog box will ap-
pear. All the element view windows will also
appear.
The added image will be displayed in the [Tex-
ture List] in the [Edit-Image] dialog box.
Edit – Images