Konica Minolta VIVID 300 Universal Remote User Manual


 
187
Chapter
2
Build
Menu
9i
910
900
700
300
Build – Move – Points [P] (Effective while held down)
Moving the Selected Points
This command is used to move the selected point(s).
Note
Executionofthiscommandmaynotdisplaysimplieddata.
Left : Moves the point(s) using the mouse.
Middle ([Shift] + Left) : Moves the point(s) along the major axis.
Right : Moves the point(s) by entering values.
Operating Procedure
1
From the element list, select the desired
elements.
2
Select the point(s) you want to move.
3
From the [Build] menu, select [Move]
and then click [Points].
The selected element will be ready to be dis-
played in all windows. It will be displayed if it
is not displayed in the active window or the
windows for which all the elements are set to
be displayed.
If you select all of the element’s points at Step 2
above, this command becomes equivalent to the
Build – Move – Elements command.
Ref.
For information about the Build–Move–Elements
command, see page 189.
4
Drag the points with the left mouse but-
ton.
The point(s) will move accordingly.
Dragging with the middle (or [Shift] + Left) but-
ton will move the point(s) along the major axis.
5
Press the [ESC] key.
Build – Move – Points mode will be canceled.