Konica Minolta VIVID 300 Universal Remote User Manual


  Open as PDF
of 270
 
182
Chapter
2
Build
Menu
9i
910
900
700
300
Build – Registration – Initial – Manual
Performing Initial Registration of Elements Manually
This command is used to perform registration of elements by designating corresponding points.
Left : Designates corresponding points.
Middle ([Shift] + Left) : Cancels designation of corresponding points
Right : Performs registration.
Operating Procedure
1
From the element list, select the desired
elements.
2
From the [Build] menu, select [Registra-
tion], [Initial] and then click [Manual].
The [Build-Registration-Initial-Manual] dialog
box will appear.
• The selected element will be ready to be dis-
played in all windows. It will be displayed if
it is not displayed in the active window or the
windows for which all the elements are set to be
displayed.
3
Select the basis element in the dialog
box, and click the [OK] button.
All the currently displayed windows will be
hidden, and the temporary window for each
selected element will appear.
• Each temporary window is a “Isometric” or
“Perspective” view and displayed in texture map-
ping mode (if the element has a color image) or in
shading mode (if the element has no color image).
One element will be displayed in each temporary
window. The elements will be fully framed.
• It is not possible to change the view mode and
rendering mode for the temporary windows.
4
On the first window click the desired
point using the left mouse button, then
click the left button at the correspond-
ing point on the second window.
When the left mouse button is clicked on a
window, a marker (n mark) will be displayed.
Different colors of markers are available, and
each pair of corresponding points will have a
different color.
M
emo
Dragging a corresponding point with the left mouse
button will move it.
Note
Analarmwillbeheardifapointthathasnodatais
clickedinawindoworiftheleftbuttonisclickedtwice
ormorecontinuouslyinthesamewindow.
5
Repeat step 4 until three or more pairs
of corresponding points are designated.
The order of designating points in the rst and
second windows for the rst pair can differ
from that for the second pair.
 previous next