Filter
Top Products
25
Menu Configuration
Menu Configuration
The features and options of the DVR are configured
through the menu.
The operations of this unit can be set via a menu dis-
played on the main monitor. You can select and set
the operational conditions by using the buttons on the
front panel and the remote control or using a USB
Mouse connected to the unit.
Using a Mouse to Set a Menu
Use the left and right mouse buttons to set the menu.
• Left button: Use to select a required item or
decrease the options value.
• Right button: Use to increase the options value.
1. Click the [SETUP] icon on the bottom of the
on-screen display with the left mouse button to
display a setup menu.
2. Click the desired option with the left mouse button
to move to the second or third level.
3. Click the desired option with the left mouse but-
ton.
4. Set the selected options value.
5. Click the Exit icon to exit setup menu.
If the save message appears, click [OK] with the
left mouse button to save the settings.
Setting the Menu Using the Front
Panel Buttons or Remote Control
Buttons
Arrow Buttons:
Use these buttons to select the menu options or
adjust the options value.
ENTER:
Select the option or confirm the setting.
ESC:
Return to the previous menu or level.
1. Press SETUP/ESC to display the setup menu.
2. Use v / V to select the desired option.
3. While the desired item is selected, press ENTER
to move to the second level.
4. Use v / V to select the desired option then press
ENTER to move to the third level.
5. Use v / V / b / B to select the desired option
then press ENTER to set the value.
6. Use b / B to select the desired setting then
press ENTER to confirm your selection.
7. Press SETUP/ESC to exit the Setup menu.
If the save message appears, press ENTER to
save the settings.
Notes:
• When you operate the function menu by using the
remote control and front panel buttons, both
buttons are operated in the same way to control the
function menu.
• To use other functions of number buttons on the
front panel as shown below.
1.Press SHIFT.
The button indicator turns green.
2.Select the function button you want.
• All the operation explanations are based on
using the remote control.
HOOKUP AND
SETTINGS
Title tab
Help menu
First
level
Second
level
Third
level