Filter
Top Products
55
Schedule Copy Settings
1. Select the source day to copy.
2. Select the destination day from the day of
the week, weekday or weekend options.
3. Click the copy button to copy the schedule data.
Special Day Settings
1. Mark up the special day option.
2. Select the date to set the special day schedule.
3. Mark up the desired recording option.
4. Select the channel to set the schedule.
5. Click the start time cell block and drag & drop to
select a time period cell block.
or
Click the start time cell block of a channel and
drag & drop across the channels to select the
time period block for multi channel setting at the
same time.
The color of the cell block will change.
6. Enter the name of the special day.
7. Click the add button to add the special day set-
tings.
The special day is added to the list.
If you want to cancel the registered special day,
select the special day in the list and click the
delete button.
Event setup
1. Set the event options.
• Sensor In: Displays the number of the
SENSOR-IN terminal.
• Sensor Type: The alarm state can be set to
either N.O. (Normally Open) or N.C. (Normally
Closed).
• Linked Camera: Select the connected camera
channel with the SENSOR-IN terminal.
• Alarm Out: Select the alarm output number of
the ALARM-OUT terminal for the output alarm
signal.
2. Setting [Etc] options.
• Alarm Off: Set the manual or post-alarm time
option to off.
CLIENT
PROGRAM