Filter
Top Products
35
Update
z Item: Select the item to be updated.
- PTZ PROTOCOL: Select to PTZ PROTOCOL
update.
- SYSTEM S/W: Select to SYSTEM S/W update.
z Method: Select the update method.
- USB: When you update from USB memory stick.
- NETWORK: Update from the update server.
z Update Server: If you select the method option for
NETWORK, enter the IP address of an update
server using the virtual keyboard for network
update.
z Update: Select the [Update] tab to start update.
Notes:
• If you can not update from the update server, check
the TCP/IP options and the IP address of update
server.
• If you use a USB memory stick to update, you must
disconnect the other external USB devices.
Configuration
z Configuration Import: Import the DVRs
configuration data from the USB memory stick.
z Configuration Export: Export the configuration
data from this DVR to the USB memory stick.
z Factory Default: You can reset the DVR to its orig-
inal factory settings. Some options cannot be reset
(date, time, daylight saving, time zone and user
password settings).
Notes:
• Configuration data import is available when the
configuration data of a DVR is the same kind as
this unit’s data.
• If you use a USB memory stick for configuration
export, you must disconnect the other external USB
devices.
Hard Disk
z Format: Initializes the HDD (Hard Disk Drive). All
data on the selected HDD will be erased.
z Overwrite:
- ALL: Overwrite recording is possible when the
normal partition and event partition of HDD have
fully recorded.
- NORMAL PARTITION: Overwrite recording is
possible for normal partition of HDD when the
normal partition of HDD has fully recorded.
- EVENT PARTITION: Overwrite recording is
possible for event partition of HDD when the
event partition of HDD has fully recorded.
- OFF: Do not use overwriting.
z Full Warning: When the HDD has overflowed a
warning message is displayed.
z Event Partition: Set the space of event partition
for event recording.
Note:
If you change the value of event partition, the current
recorded data of HDD is deleted and the partition is
reset. The partitions will be formatted automatically
and the system will be restarted.
HOOKUP AND
SETTINGS