Filter
Top Products
28
Schedule Settings
Schedule Settings
The DVR can record according to a schedule set by
the user. It can also record manually regardless of
date and time. The recording can be made either
continuously or triggered by events (alarm and
motion detection).
The recording schedule screen displays one day of
the week showing the schedule of all channels over a
24-hour period.
For each 1-hour cell block the recording method can
be specified. The recording method (continuous, sen-
sor, motion, sensor+motion) for each block is shown
in color for easy viewing.
To Set the Recording Schedule for a
Typical Day of the Week
1. Select a day of the week.
2. Select the desired channel to schedule recording.
3. Select the time cell block for the start time.
4. Press ENTER or click the left mouse button to
select a recording mode. The color of the cell
blocks will change automatically.
- Gray: No scheduled recording
- Green (continuous recording): recording starts
automatically from the preset time.
- Red (sensor event recording): recording starts
automatically when the sensor alarm is occurs
within a designated time.
- Blue (motion event recording): recording starts
automatically when motion is detected within a
designated time.
- Yellow (sensor+motion recording): recording
starts automatically when the sensor alarm
signal has input or motion has been detected.
5. Select the next time cell block of schedule time
cell blocks to confirm the schedule time.
6. Press ENTER or click the left mouse button
repeatedly to select gray to set the time for the
end of the schedule. The settings cell block is
highlighted.
7. Press SETUP/ESC to move to the previous menu.
To Set a Recording
Schedule for a Special Day
In addition to the weekly schedule, up to 10 specific
date/time periods can be defined. To configure the
specific recording schedule select Specific Dates.
1. Select the [Special Day] option.
2. Select a cell block.
3. Press the ZOOM + button or click the [Add] icon
on the special day setting menu.
The specific date selection menu appears.
4. Enter the necessary information for year, month
and date.
• b / B / v / V: Press to move the columns,
[OK] or [Cancel] buttons.
• b / B (or left/right mouse button): Changes
the value at the current position.
• ENTER: Confirm the selection.
• Press ESC to exit the specific date selection
menu.
Channel
numbers
Time line
1-hour
cell block
Recording mode