Filter
Top Products
53
7. Click the search icon.
The smart search data is displayed.
8. Select the channel from the list.
9. You can play the searched data using the play-
back control buttons.
Remote Setup Mode
Remote Setup Mode
You can set the DVR of a selected site name in the
remote setup tab via the network.
Camera / Display Setup
Camera Setting
1. Select a channel for settings.
If you want to block a channel from other users,
mark up the convert option. The marked up chan-
nels are displayed “Video Loss” on the live win-
dows for POWER or NORMAL user.
2. Enter the new channel name.
3. Select input audio channel.
4. Set the PTZ control options.
• Port: Select the connected data port of the
RS-422/485 terminal on the rear panel.
• Control ID: Select the PTZ camera ID from 0
to 255. Make the same settings as the PTZ
camera.
• Protocol: Select the protocol supported by
PTZ camera.
• Baud Rate: Select the communication
speed.(1200, 2400,4800,9600,19200 or
38400)
5. Set the motion options.
• Sensitivity: Set the sensitivity level for the
created motion detection area. Sensitivity can
be set from 0 to 10.
• Alarm Out: Select the number of the
ALARM-OUT terminal for the output alarm
signal when motion is detected.
• Area: Select the desired motion detection area
on the preview window screen using the
mouse. Click the one point and drag & drop
the end point to select the motion area.
Notes:
• If you want to display the grid, mark up the [Show
Grid] option.
• If you want to select the entire area, click the [Set
All] button or click the [Clear All] button to cancel
the selected area.
CLIENT
PROGRAM