57
System setup
Date/Time settings
Set the date/time options.
z
NTP: Mark up when using the NTP (Network
Time Protocol) server for time adjustment.
z Date Format: Select the date display format.
z Time Zone: Select your time zone.
z Time Server: Select your time server.
The DVR will obtain the average time among
5 public servers (rime.nist.gov, time-a.nist.gov,
time-b.nist.gov, ntp.nasa.gov, clock.isc.org).
z Private Time Server: Enter the private time
server's IP address or host name.
z Sync. Interval: You can set synchronized
interval with the NTP time server to 1 day, 1
hour, 1 week and 1 month.
Update Settings
Set the update options.
z Item: Select the items for updating.
- PTZ PROTOCOL: Set to PTZ PROTOCOL
update.
- SYSTEM S/W: Set to SYSTEM S/W
update.
z Method: Select the update method.
- USB: Update from USB memory stick.
- Network: Update from the update server.
z Update Server: Enter the IP address of the
update server.
Note:
If you can not update from the update server, check
the TCP/IP options and the IP address of the update
server.
Administrator
z Administrator: Enter the new password for the
administrator using the virtual keyboard.
z Power User: Enter the new password for the
power user using the virtual keyboard.
z Normal User: Enter the new password for the
normal user using the virtual keyboard.
Note:
Remember the new password. If you forget the new
password please contact an authorized service
center or the store where you purchased the system.
Buzzer Settings
Select the buzzer options.
z Button Beep: Makes a sound when using the but-
tons.
z Sensor Buzzer: Makes a sound when an alarm
occurs.
z Motion Buzzer: Makes a sound when motion is
detected.
Log Out
z Auto Logout: Setting the logout time.
If you mark up the option it will automatically logout
at selected intervals.
z Time: You can set the auto logout time to 5
minutes, 10 minutes, 30 minutes or 60 minutes.
Hard Disk
z Overwrite: Select the overwrite recording type (Off,
Normal Partition, Event Partition or All). This func-
tion is possible when the selected HDD type has
fully recorded.
z Full Warning: When the HDD has overflowed the
warning message is displayed.
z Event Partition: Sets the space of event partitions
for event recording.
CLIENT
PROGRAM