Filter
Top Products
26
Camera Settings
Camera Settings
Camera
The channel name, covert and input audio channel
settings are configured.
z Ch: Displays the channel number.
z Name: Enter the channel name using up to 12
characters.
- b/B/v/V: Select a character.
- ENTER: Confirms your selection.
- ESC: Exits the virtual keyboard menu.
z Covert: You can set the camera conditions to
prevent operation by other users. If the covert
option is set to ON, “Video Loss” is displayed on
the live window with POWER or NORMAL user.
z Audio: You can hear from the selected input audio
channel.
Video Adj
Adjust the brightness, contrast and color settings of
each camera channel. You can see the settings
screen from the preview windows.
z Channel: Selects the desired channel to adjust.
z Brightness: Adjust the brightness value from 0 to
100 for the selected channel.
z Contrast: Adjust the contrast value from 0 to 100
for the selected channel.
z Color: Adjust the color value from 0 to 100 for the
selected channel.
PTZ
Settings for the PTZ cameras connected via the data
port of the RS-422/485 terminal.
z Channel: Selects the desired channel to set the
connected PTZ camera.
z
Port: Selects the connected data port of the
RS-422/485 terminal on the rear panel.
z Control ID: Selects the PTZ camera ID from 0 to
255. Make the same settings as the PTZ camera.
z Protocol: Selects the protocol supported by PTZ
camera.
z Baud Rate: Selects the communication speed.
(1200, 2400,4800,9600,19200 or 38400)
z PTZ Test: After the PTZ setting, you can test the
pan/tilt function for the selected PTZ camera. You
can see the test screen from the preview windows
on the right side of the PTZ test option.
- b / B: Test the pan direction.
- v / V: Test the tilt direction.
Note:
The supported PTZ camera list is on page 64 for
reference.