Filter
Top Products
23
PF (Programmable Function)
Three setup menu items can be registered in the PF buttons, and these buttons can then be used to change the setup menu
settings by a simple operating procedure.
Performing operations using the PF
buttons
1 Open the setup menu by pressing the Menu button, and
move the cursor to the A00 MENU by tilting the joystick
down and then to the right.
2 Move the cursor to the item with the PF number to be
registered (A04 to A06) by tilting the joystick up and
down.
3 When the joystick is pressed, a list of items which can be
set is displayed.
4 Press the joystick to select the item at the cursor
position; the display will then return to the regular menu.
<Notes>
z The following menu items cannot be saved.
z As for the menu items registered in the PF button, when
the menu is not displayed due to change of settings in
menu No. 25 SYSTEM FREQ are changed, the registered
contents in the interlocked PF button will be in the “not
saved” state and cannot be displayed nor operated. Refer
to “Menus which are displayed” (page 32).
The settings for the PF buttons are retained but will be
updated once save operations are executed again.
Operation using the PF buttons
1 When the PF button is pressed, the registered items are
displayed on the monitor screen which is output from the
VIDEO MON connector.
2 Press the PF1, PF2 or PF3 button that corresponds to
the item whose setting is to be changed. Each time the
button is pressed, the setting is updated in sequence.
3 When the PF button is pressed again, the regular display
is restored. If no operations are made, the display is also
restored automatically after five seconds elapse.
SETUP-MENU MENU
<USER1> NO.A04-
A02 P.ON LOAD OFF
¢
A04 PF1 ASSIGN 012
A05 PF2 ASSIGN 513
A06 PF3 ASSIGN ---
END
SETUP-MENU MENU
<USER1> NO.A04-
A04 PF1 ASSIGN 012
¢
--- NO ASSIGN
001 LOCAL ENA
002 LOCAL TIMER
003 REMAIN SEL
008 CHARA H-POS
009 REMAIN SEL
010 CHARA V-POS
No. Menu item No. Menu item
05 ENCODER SEL 653 Y LEVEL (HD)
06 V LEVEL CTRL 654 Pb LEVEL (HD)
12 SYS H (HD) 655 Pr LEVEL (HD)
14 SYS SC (SD) 656 BK LEVEL (HD)
15 VO SYS SC (SD) 658 Y LEVEL (SD)
16 SD SYS SC (SD) 659 Pb LEVEL (SD)
18 SCH CORS (SD) 660 Pr LEVEL (SD)
19 SCH FINE (SD) 661 BK LEVEL (SD)
20 AV PHASE 662 V LEVEL
25 SYSTEM FERQ 663 C LEVEL
26 HD SYS H ADV
664
HUE
(AJ-HD1400P)
181 TYPE A NEAR
C PHASE
(AJ-HD1400E)
182 TYPE A END
665
SETUP LVL
(AJ-HD1400P)
183 TYPE B NEAR
BK LVL
(AJ-HD1400E)
184 TYPE B END
PF1:SYS FORMAT 50M
PF2:INT SG CB75
PF3:---------- ---