Filter
Top Products
57
Superimpose screen
The control signals, time code, etc. are displayed using
abbreviations.
CTL : Control signal count value
TCR : Time code data recorded in the SBC area
TCR.: Time code data recorded in the VAUX area
UBR : User bit data recorded in the SBC area
UBR.: User bit data recorded in the VAUX area
TCG : Time code data of the time code generator
UBG : User bit data of the time code generator
<Notes>
z [T ¢ R], [T ¢ R.], [U ¢ R] or [U ¢ R.] is displayed when the
data has not been read correctly from the tape.
z When the 23.98/24 Hz, 25 Hz (HD/SD), or 50Hz (HD/SD)
mode is selected in menu No. 25 SYSTEM FREQ,
indications on the CTL and TCR will be “--:--:--:--”.
Characters displayed
The background of characters superimposed on the display
can be changed using menu No. 009 CHARA TYPE.
Display position
The position of the characters superimposed on the display
can be changed using menus No. 007 CHARA H-POS and
No. 008 CHARA V-POS.
Operation mode
The VTR’s operation mode can also be displayed using
menu No. 006 DISPLAY SEL.
TCR ¢¢ : ¢¢ : ¢¢ : ¢¢
TV monitor
Abbreviations:
TCR ¢¢ : ¢¢ : ¢¢ : ¢¢
TV monitor
TCR ¢¢ : ¢¢ : ¢¢ : ¢¢
TV monitor
TCR ¢¢ : ¢¢ : ¢¢ : ¢¢
TV monitor TV monitor
TCR ¢¢ : ¢¢ : ¢¢ : ¢¢
TCR ¢¢ : ¢¢ : ¢¢ : ¢¢
STOP
TV monitor
VTR operation mode