Filter
Top Products
31
Setup (initial settings) (continued)
System frequency switching
Procedure for shifting the system frequency
To shift the system frequency execute the following operations.
1 Change the set value of menu item No. 25 SYSTEM
FREQ. For the method to change the set value, refer to
"Setting method using the on-screen menus" (page 27) .
Once the set value is changed, the outer frame of the
display part of SYSTEM FREQ and the characters in
SYSTEM on the front display panel start flashing.
2 Press the MENU button.
3 The confirmation screen is displayed to enable the
changed set value.
z To enable the change to set value, press the PLAY
button. Then the system resumes and starts again in
the selected mode.
z To disable the change to the set value, press the STOP
button. Any other changes in the set up menu items
are also disabled.
<Note>
If the system is restarted when a cassette remains in the
unit, the cassette will automatically be ejected.
<Selection of the record and playback format and the synchronizing signal depends on the operation mode>
NO.25
SYSTEM
FERQ
Recordable format Playback permissible format Synchronized signal
59/60
1080/59.94i (HD_LP)
720/59.94p (HD_LP)
720/60.00p (HD_LP)
(Only the variable frame rate
signal can be recorded.)
1080/59.94i
1080/60i
720/59.94p
720/60.00p
480/59.94i (50M, 25M, DV, DVCAM)
HD_REF (59.94Hz, 60Hz)
SD_REF (59.94Hz)
According to the setting in menu
No. 031 OUT REF.
50i/25P
1080/50i (HD_LP)
720/50p (HD_LP)
1080/50i
720/50p
576/50i (50M, 25M, DV, DVCAM)
576/25p over 50i (50M, 25M, DV)
HD_REF (50Hz)
SD_REF (50Hz)
According to the setting in menu
No. 031 OUT REF.
23/24 None
1080/23.98p over 59.94i [2:3 mode]
1080/23.98p over 59.94i [2:3:3:2 advance mode]
720/23.98p over 59.94p
720/24p over 60.00p
480/23.98p over 59.94i [2:3 mode]
480/23.98p over 59.94i [2:3:3:2 advance mode]
HD_REF (47.96Hz, 48Hz)
25 (HD) None 720/25p over 60p
HD_REF (50Hz)
SD_REF (50Hz)
According to the setting in menu
No. 031 OUT REF.
25 (SD) None 720/25p over 60p
HD_REF (50Hz)
SD_REF (50Hz)
According to the setting in menu
No. 031 OUT REF.
50 (HD) None 720/50p over 60p
HD_REF (50Hz)
SD_REF (50Hz)
According to the setting in menu
No. 031 OUT REF.
50 (SD) None 720/50p over 60p
HD_REF (50Hz)
SD_REF (50Hz)
According to the setting in menu
No. 031 OUT REF.
SYSTEM
59.94 60
50/25PsF
23.98
25
24
50
HD
SD
SETUP-MENU SET OK?
YES<PLAY>/NO<STOP>
S
ystem
menu
item
N
o.
25
(SYSTEM FREQ)
setting
has been changed.