Filter
Top Products
51
Setup menus (continued)
AUDIO
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
“_____” indicates the factory setting.
No./Item Description of setting
701*
1
CH1 IN LV
For setting the reference level of the analog audio
input (CH1).
0000 4dB
0001
0dB
0002 –20dB
0003 –60dB
702*
1
CH2 IN LV
For setting the reference level of the analog audio
input (CH2).
0000 4dB
0001
0dB
0002 –20dB
0003 –60dB
706
CH1 OUT LV
For setting the reference level of the analog audio
output (CH1).
0000 4dB
0001
0dB
0002 –20dB
707
CH2 OUT LV
For setting the reference level of the analog audio
output (CH2).
0000 4dB
0001
0dB
0002 –20dB
710
MONIL OUT
LV
For setting the reference level of the analog audio
output (Lch).
0000 4dB
0001
0dB
0002 –20dB
711
MONIR OUT
LV
For setting the reference level of the analog audio
output (Rch).
0000 4dB
0001
0dB
0002 –20dB
712
MONI OUT
For selecting whether or not to enable the
headphone volume control knob for the volume of an
audio monitor output.
0000 UNITY :
The signals are output at a fixed level.
0001 VAR :
The signal output is coupled with the headphones
volume control.
724*
1
REC CH3/4
This selects the input signal to be recorded on the
audio CH3/4 track.
0000 CH1/2 :
Audio input CH1/2 signal.
0001 MUTE :
Mute
<Notes>
z This item is effective for analog input only.
z When selecting analog input, the same data as
CH1 to CH4 is recorded in CH5 to CH8.
No./Item Description of setting
730*
1
REC CUE
For setting the input signal to be recorded on the CUE
track.
0001 CH1 :
Audio input CH1 signal
0002 CH2 :
Audio input CH2 signal
0003 CH3 :
Audio input CH3 signal
0004 CH4 :
Audio input CH4 signal
0005 CH5 :
Audio input CH5 signal
0006 CH6 :
Audio input CH6 signal
0007 CH7 :
Audio input CH7 signal
0008 CH8 :
Audio input CH8signal
0009 CH1+2 :
Audio input CH1 + CH2 mixed signal
0010 CH3+4 :
Audio input CH3 + CH4 mixed signal
0011 CH5+6 :
Audio input CH5 + CH6 mixed signal
0012 CH7+8 :
Audio input CH7 + CH8 mixed signal
0013 CH1~8 :
Audio input CH1 through CH8 mixed signal
<Notes>
z For analog input, this is interlocked to the settings
in menu No. 724 REC CH3/4.
z Audio signal is not recorded in the CUE track when
inputting 1394. (Mute)
731
PB FADE
For setting the processing for the audio edit points (IN
point, OUT point) and followon recording point during
playback.
0000 AUTO :
The processing follows the status established
during recording.
0001 CUT :
Cut processing is forcibly performed.
0002 FADE :
Fade processing is forcibly performed.
732
EMBEDDED
AUD
For setting whether to superimpose audio data onto
the HD SDI output and SD SDI output.
0000 OFF :
The audio data is not superimposed.
0001 ON :
The audio data is superimposed.
746
MONI CH
SEL
For selecting the monitor output.
0000 MANU :
The signal selected by the MONITOR SELECT
button is output.
0001 AUTO :
The PCM audio signal is output when the speed
range is less than j1.0k to +1.0k; the CUE
AUDIO signal is output at all other speeds.
0002 PCM :
The PCM audio signal is output in the j32k to
i32k speed range.
<Note>
When the L/R selection is CUE with the MONITOR
SEL button on the front panel of this unit, CUE
AUDIO is output at all speeds, regardless of the
above menu.