Filter
Top Products
65
Specifications
[GENERAL]
Ambient operating temperature:
5°C to 40°C (41°F to 104°F)
Storage temperature:
–20°C to 60°C (–4°F to 140°F)
Ambient operating humidity:
10% to 80% (no condensation)
Dimensions (WkHkD):
214 mm k 132 mm k 442 mm
(8-7/16 inches k 5-1/4 inches k 17-3/8 inches)
(Protruding portion is not included)
Weight:
8.5 kg (18.74 lb)
Recording format:
DVCPRO HD-LP
Recording video signals:
1080i/59.94 Hz, 50 Hz,
720p/59.94 Hz, 50 Hz, 60 Hz (only Varicam)
switchable
Recording audio signal:
48 kHz, 16 bits, 8 channels
Recording tracks:
Digital video/audio: Helical track
Time code: Helical track (sub code area)
Cue signal: 1 track
Control (CTL) signal: 1 track
Playback formats:
DVCPRO HD-LP, DVCPRO HD, DVCPRO50,
DVCPRO, DV-SP, DVCAM
Recording tape speed:
67.640 mm/sec (in 59.94 Hz mode)
67.708 mm/sec (in 50/60 Hz mode)
Recording time:
64 min (when using AJ-HP64ELG)
Tapes used:
Metal tapes
FF/REW time:
Approx. 90 sec (when using AJ-HP64ELG)
Editing accuracy:
±0 frame
(when time code is used, in 50 Hz, 59.94 Hz or
60 Hz mode)
Tape timer accuracy:
±2 frames (when continuous CTL signal is used)
(For slow replay at half speed or less, errors may
occur in the CTL count.)
[VIDEO]
_Digital video
Sampling frequency:
Y: 74.25 MHz
P
B/PR: 37.125 MHz
Quantizing:
8 bits
Video compression system:
DCT + variable length code
Video compression ratio:
1:6.7
Error correction:
Reed-Solomon product code
Video recording bit rate:
100 Mbps
_Video input connectors
HD serial digital input:
BNC k 1
(compliant with SMPTE 292M/296M/299M
standards)
Reference input:
Black burst/HD tri-level sync automatic switching
BNC k1 (loop-through k 1)
75 h termination automatic switching
_Video output connectors
HD serial digital output:
BNC k 2
(compliant with SMPTE 292M/296M/299M
standards)
(information superimposing ON/OFF)
SD serial digital output:
BNC k 1 (compliant with SMPTE 259M-C/
272M-A, ITU-R BT.656-4 standards)
(information superimposing ON/OFF)
Analog composite output:
BNC k 1
VIDEO 1, VIDEO 2
(information superimposing ON/OFF)
HD analog component output:
BNC k 3 (Y/P
B/PR)
(information superimposing ON/OFF)
(VIDEO1 and HD analog component Y output
are switched.)
Power supply: AC 100-240 V , 50/60 Hz, 85 W
DC 12 V, 5.3 A, 64 W
indicates safety information.