Filter
Top Products
8
Features (continued)
Multi-functional interfaces
z Serial digital input/output
The unit’s HD component serial I/O interface enables
interfacing with HD component video signals and 8-
channel digital audio signals using a single BNC
connector. (SMPTE 292M/296M/299M)
The unit is also equipped with an SD downconverter as
a standard feature so that SD component serial signals
can be output as well.
(SMPTE 259M-C, 272M-A, ITU-R BT.656-4)
z Analog video output
Since the unit’s down-converter comes as a standard
feature, the analog composite signals can be monitored
on an SD monitor.
z 9-pin remote
The unit’s 9-pin remote control connector enables it to
be operated with an external remote controller.
z IEEE1394 digital input/output
Set to this position when controlling this unit with the AV/
C command of the 9-pin REMOTE, REMOTE of HD
SDI, IEEE1394.
<Note>
When any of the settings below is established, no
signals will be output from the IEEE1394 digital
interface.
z When “60/24” is selected as the menu item No.030
HD FREQUENCY setting
z When “23/24,” “25 (HD),” “25 (SD),” “50 (HD),” or “50
(SD)” is selected in menu item No. 025 SYSTEM
FREQ.
<Playback formats and output formats>
Playback format Output format
DVCPRO HD-LP,
DVCPRO HD
DVCPRO HD,
DVCPRO50, DV
DVCPRO50 DVCPRO50, DV
DVCPRO DVCPRO, DV
DV, DVCAM DV
In case of EE and REC modes:
z Select a value other than “1394” with the
INPUT SELECT button on the front
panel.
DVCPRO HD