Filter
Top Products
49
Setup menus (continued)
VIDEO (continued)
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
*UP: With HD output (HD tape playback or up-converted
output)
*DW: With SD output (SD tape playback or down-converted
output)
“_____” indicates the factory setting.
No./Item Description of setting
665
SETUP LVL
(AJ-HD1400P)
BK LVL
(AJ-HD1400E)
For adjusting the setup ( or black) level of the HD SDI,
analog component output, SD SDI output and analog
composite output. (–10 o to +10 o)
50 –10%
: :
150
0.0%
: :
250 +10.0%
<Note>
This setting takes effect when “CMPST” has been
selected as the menu item No.650 setting.
676*
1
BLK CLIP
For setting whether to clip what is below the pedestal
level for the Y (luminance) signal of composite output
and SD SDI output.
0000 OFF :
What is below the pedestal level is not clipped.
0001 ON :
What is below the pedestal level is clipped.
680*
1
CC (F1)
BLANK*
DW
For selecting ON or OFF for the closed caption signal
in the first field.
0000 BLANK :
Forced blanking
0001 THRU :
No blanking
681*
1
CC (F2)
BLANK*
DW
For selecting ON or OFF for the closed caption signal
in the second field.
0000 BLANK :
Forced blanking
0001 THRU :
No blanking
682*
1
VO SETUP
(HD)*
UP
(AJ-HD1400P)
This selects the composite output signal in HD mode.
0000 THRU :
The signal is output with no setup added.
0001 ADD22L :
The signal is output from line 22 with a 7.5% setup
added.
0002 ADD21L :
The signal is output from line 21 with a 7.5% setup
added.
0003 ADD20L :
The signal is output from line 20 with a 7.5% setup
added.
683*
1
VO SETUP
(SD)*
DW
(AJ-HD1400P)
This selects the composite output signal in SD mode.
0000 THRU :
The signal is output with no setup added.
0001 ADD22L :
The signal is output from line 22 with a 7.5% setup
added.
0002 ADD21L :
The signal is output from line 21 with a 7.5% setup
added.
00023 ADD20L :
The signal is output from line 20 with a 7.5% setup
added.
684*
1
EDH (SD)*
DW
For setting whether to superimpose EDH onto the SD
SDI output.
0000 OFF :
EDH is not superimposed.
0001 ON :
EDH is superimposed.
685*
1
ESR MODE
(SD)*
DW
For selecting the mode of the edge subcarrier
reduction (ESR) operation in the playback circuit.
0000 OFF :
ESR is forcibly turned off.
0001 AUTO :
ESR is automatically set to ON or OFF depending
on the unitÅfs operation.
No./Item Description of setting
686*
1
CCR MODE
(SD)*
DW
For selecting the cross color processing during
playback.
0000 OFF :
The cross color is output as is.
0001 ON :
The cross color can be reduced.
687*
1
SDI INDEX
0*
DW
For selecting whether to superimpose the VIDEO
INDEX signal on the SD SDI output signal.
0000 OFF :
The VIDEO INDEX signal is not superimposed on
the SD SDI output signal.
0001 ON :
The VIDEO INDEX signal is superimposed on the
SD SDI output signal.
689*
1
COMP MODE
This is used to select the method to process the
image compression during recording.
0000 NORMAL :
The images are recorded using the regular
compression processing.
0001 DARK :
The images are recorded while minimizing the
compressed image distortion which arises in the
dark areas below about 10 IRE (70 mV).
<Notes>
z This setting is valid when recording in the 720p
mode.
z When “DARK” has been selected, the COMP lamp
lights.
690*
1
UMID REC
This selects whether or not to record the UMID
information on the tape.
0000 OFF :
UMID information is not recorded on the tape.
0001 ON :
The UMID set in menu No. 691 UMID GEN is
recorded. If no Basic UMID is available in the input
signals, a Basic UMID of the unit, which is newly
generated, is recorded.
<Note>
UMID information cannot be rewritten in this unit.
691*
1
UMID GEN
This selects a UMID that is recorded when menu No.
690 UMID REC is turned “ON”.
0000 INT :
Newly created basic UMID information of this unit
is always recorded.
0001 EXT :
The UMID information of the input signals is
recorded. If no UMID is available in the input
signals, a Basic UMID of the unit, which is newly
generated, is recorded.
<Note>
The source pack (of the UMID information) of the
input signal will be recorded on the tape, regardless
of this menu’s setting.