Filter
Top Products
60
Function menus
<SETUP MENU/SYSTEM MENU>
Selecting the menu items
Select the menu item by turning the ADJ dial.
(The cursor is moved down when the dial is turned
clockwise and up when it is turned counter-
clockwise.)
• Forward or reverse page scrolling (SETUP
menu only)
The menu list is organized by category, and the
pages can be scrolled in the forward or reverse
direction on a category by category basis.
(
:
PREV), (
;
NEXT)
<Note>
The screen may continue to scroll for a few
moments after the ADJ dial has been turned.
F2F1
Changing the settings
1. In the menu item selection status, press the
ADJ dial.
At this time, the setting of the menu item
indicated by the menu item selection cursor
blinks on the monitor.
2. Turn the ADJ dial to select the setting. (Turn it
clockwise to move up through the settings and
counterclockwise to move down through the
settings.)
When the ADJ dial is pressed again, the menu
item selection status is restored.
<Notes>
• Setting items which have submenus
A submenu is opened by pressing the
button. The same operations as the ones
described above are then used to change the
settings.
• Canceling individual items
When (CANCEL) is pressed, the setting
operation is canceled, and the item selection
status is restored.
F3
SHIFT
F1
SHIFT
F2 F3 F4 F5 F6
F1
SHIFT
F2 F3 F4 F5 F6
Item selection cursor
Monitor display menu
SETUP menu
Change mark
Change mark
SYSTEM menu
Item number
Item number
Category
Setting
Setting number
Item name
When the SETUP MENU or SYSTEM MENU opera-
tion menu is selected, a menu list appears on the
monitor, and the respective items can be set.
1.
Settings
2.
Confirmation item Description of setting
EXIT confirmation
When an attempt has been
made to exit the menu
operation after a setting has
been changed without that
setting having been entered
EXIT?
F3: CANCEL
F5: SET(and EXIT)
F6: EXIT(without SET)
Entering settings
(After a setting has been entered, the menu
operation is forcibly exited.)
Press (SET) to enter a setting.
F5
3.
4.
Exiting the menu operation
When the (EXIT) button is pressed in the
menu item selection status, the menu operation is
exited, and the original operation screen is
restored.
However, if the (EXIT) button is pressed after
a setting has been changed without that setting
having been entered, a confirmation message will
be displayed.
F6
F6
Confirmation message
<Note>
The “!” mark appears at the bottom left of the screen
when a setting has been changed.