Panasonic AJ-HD1700 VCR User Manual


 
62
Function menus
<FILE>
F1
SHIFT
F2 F3 F4 F5 F6
Memory name
Memory selection cursor
File title
(VTR)
Warning
message
File title
(VTR)
File number
(VTR)
File number
(VTR)
File status
(VTR)
This VTR comes with VTR MEMORY for storing
the current settings (*) and VTR MEMORY to
for storing these settings as a backup.
Each VTR MEMORY can be provided with a title.
Data can be saved and loaded and titles can be
copied between VTR MEMORY and VTR
MEMORY to .
The file locking facility for preventing data from
being overwritten can be engaged for VTR
MEMORY to .
41
41
C
41
C
The current setting information, including the SETUP
menu contents, can be provided with titles and either
saved in or loaded from the backup memory in one of
4 variations.
When (FILE) is pressed while the button is held
down on the <MENU> screen, the following function
menu is displayed.
FF1
Transferring files between memories
After selecting the operation file, press
(LOAD).
The contents of files selected in VTR MEMORY
to can be transferred to VTR MEMORY .
When is selected and (LOAD) is pressed,
the factory setting mode is established.
Alternatively, when (SAVE) is pressed, the
contents of a file in VTR MEMORY can be
transferred to a file selected in VTR MEMORY
to . (The titles are also transferred at the same
time.)
4
1
C
F3
F2F
C4
1
F2
Name of memory area
Initial title (up to 8 characters)
VTR MEMORY C CURRENT
VTR MEMORY 1 USER1
VTR MEMORY 2 USER2
VTR MEMORY 3 USER3
VTR MEMORY 4 USER4
Settings
Selecting the operation file in the selected
memory
The number of the currently selected file is
highlighted on the display. When the ADJ dial is
turned, the highlighting moves to the left or right,
enabling operation files to be selected.
Selecting the memory target
Press the button.
The operation target switches alternately between
VTR MEMORY and VTR MEMORY to .
41C
SHIFT
1.
2.
3.
Editing the title of the selected file
Press the ADJ dial after selecting the operation
file.
The first digit of the title display area is highlighted,
and the file title can be edited.
To input a number, press the number keys.
To input letters, tap the numbers keys until the
letter to be input appears while holding down
the button.
More than one letter is allocated to each
number key.
Turn the ADJ dial to move from one digit to the
next in the title display area.
To enter the title, press the ADJ dial again.
<Notes>
When the display screen has been switched or
the button has been pressed during title
editing, the editing enable status is canceled,
and the setting becomes invalid.
A space can be input by pressing the button
and button.
3
F
C
F
4.
* The term “settings” used here refers to all the settings on
the setup menus excluding the SYSTEM menu, what has
been registered in the PF1 and PF2 menu items, and the
contents of some of the function buttons.