Filter
Top Products
24
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Reset all unit Memory Func tions
Returns to factory setting. Use if relocating unit, or if Initial Setup
needs to be redone.
• Make sure a disc is not inserted in unit.
1 Turn the unit Power on.
2 Press MENU.
3 Press ◄► to select “SET UP.”
4 Press ▲▼ to select “LOCK” and press ENTER.
5 Hold down both MUTE on the Remote Control and
VOL- on the unit.
• The power will shut off.
6 Perform “Initial Setup” on page 21.
To exit the screen
Press RETURN.
VCR Plus+ guide channel Settings
Set these guide channels so you can use the VCR Plus+
programming number for timer recording. Before starting the
settings, prepare a chart showing the channels, station names, and
guide channels.
Station name
Guide
channel
Channel
number
Channel setting
CBS 04 04 Unnecessary
HBO 33 15
Enter channel 15 next to
Guide Channel 33.
Nickelodeon 38 20
Enter channel 20 next to
Guide Channel 38.
e.g.,
Look up the guide channels for the
stations in magazines.
Write down all the stations you can
receive.
Note:
• If you have connected a cable TV box or satellite receiver, the VCR Plus+
system does not work so you do not have to set the guide channels.
1 Press MENU.
2 Press ◄► to select “SET UP.”
3 Press ▲▼ to select “PROGRAM CH” and press
ENTER.
MENU
ADJ. SET UP FUNC.
LANGUAGE
PROGRAM CH
CLOCK
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
OK
PAGE
RETURN
SELECT
4 Press ▲▼ to select “VCR PLUS+ CH Setting” and
press ENTER.
5 Press ▲▼ to select the guide channel you want to
set and press ►.
• When selecting the guide channel, press and hold ▲▼ to scroll the
screen up and down.
PROGRAM
CHANNEL
Antenna System CATV
Auto Channel Setting
VCR Plus+ CH Setting
PROGRAM
CHANNEL
VCR Plus+ CH Setting
Guide Channel CATV Channel
125
1
2
3
- - -
- - -
- - -
- - -
6 Press ▲▼ to select the channel corresponding to
the guide channel and press ◄.
• To delete a number, press CANCEL.
• Repeat steps 5 and 6 to enter other channels.
7 Press ENTER.
PROGRAM
CHANNEL
VCR Plus+ CH Setting
Guide Channel CATV Channel
4
5
6
7
8
- - -
- - -
- - -
- - -
- - -
Change Language Setting
1 Press MENU.
2 Press ◄► to select “SET UP.”
3 Press ▲▼ to select “LANGUAGE” and press
ENTER.
MENU
ADJ. SET UP FUNC.
LANGUAGE
PROGRAM CH
CLOCK
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
OK
PAGE
RETURN
SELECT
LANGUAGE
LANGUAGE ENGLISH
CHANGE
RETURN
4 Press ◄► to select Language.
5 Press RETURN twice to exit.
Preparation
• Complete Auto Channel Setting. (pp. 21, 22)