Filter
Top Products
31
TV Operation
C2C1NO
CLOSED CAPTION
ON MUTE NO
MODE OFF
CHANGE
RETURN
SELECT
4 Press ▲▼ to select “
CC
ON MUTE.”
5 Press ◄► to select “NO (OFF)”, “C1” or “C2”.
4 Press ▲▼ to select “
CC
MODE”.
5 Press ◄► to select “OFF”, “C1” or “C2”.
CLOSED CAPTION
ON MUTE NO
MODE OFF
CHANGE
RETURN
SELECT
C2C1OFF
OFF:
Recommended mode when Closed Caption is not being
used.
C1:
For video related information that can be displayed (up to 4
lines of script strategically placed on the television screen
so that it does not obstruct relevant parts of the picture).
C2:
Another mode used for video related information.
Recording and Playing Back a Closed
Caption Program
Record:
Record normally. Closed Caption signal, if present, is recorded
automatically.
Playback:
Start playback. Perform steps to select desired caption mode.
NO:
A narration will not be displayed when MUTE button is
pressed for silence.
C1 or C2:
A narration of selected TV programs is displayed when
MUTE button is pressed for silence.
CC
ON MUTE
Displays the On-Screen Closed Caption when the MUTE button
is pressed. To delete the closed caption, press the MUTE button
again.
CC
MODE
Displays the On-Screen Closed Caption.
Audio Adjust
1 Press MENU.
2 Press ◄► to select “ADJ.”
3 Press ▲▼ to select “AUDIO ADJUST” and press
ENTER.
MENU
ADJ. SET UP FUNC.
PICTURE
PICTURE ADJUST
POSITION/SIZE
AUDIO
AUDIO ADJUST
OK
PAGE
RETURN
SELECT
AUDIO ADJUST PAGE 1/2
NORMAL
MODE STANDARD
BASS 0
TREBLE 0
BALANCE 0
SURROUND OFF ON
D.ENHANCER OFF ON
STEREO SAP MONO
HDMI IN AUTO
CHANGE
RETURN
SELECT
4 Press ▲▼ to select the sub-menu.
5 Press ◄► to select the setting listening the sound.
NORMAL/NORMALIZE
Select “NORMALIZE” and press ENTER to return each MODE to
the factory default setting.
Notes:
• “NORMAL” means the MODE is in the factory default setting. “NORMAL”
changes to “NORMALIZE” when you change the setting of BASS,
TREBLE, BALANCE, SURROUND, D.ENHANCER or AUDIO LEVELER.
• You can normalize each MODE separately.
MODE
You can also change “MODE” by pressing AUDIO MODE on the
Remote Control.
AUTO Automatically adjusts for a wide Dynamic Range.
STANDARD Emits the original sound.
DYNAMIC Gives contrast to sound.
(Continued on next page.)
BASS, TREBLE, BALANCE, SURROUND,
D.ENHANCER
You can change the level of each sub-menu (BASS, TREBLE,
BALANCE, SURROUND, D.ENHANCER) for each MODE
(AUTO, STANDARD and DYNAMIC) according to your personal
preference.
BASS Adjusts low frequencies.
TREBLE Adjusts high frequencies.
BALANCE Adjusts left and right volume.
SURROUND To enjoy a concert hall effect.
D.ENHANCER
The volume of the center channel is raised to make
dialog easier to hear. (DVD playback only)
AUDIO ADJUST PAGE 2/2
NORMAL
AUDIO LEVELER 0
ADJUST
RETURN
SELECT
Note:
• To activate this feature, set
CC
MODE to OFF.