Filter
Top Products
27
TV Operation
STEREO
SAP MONO
1 Press DISPLAY to display or remove the overlay.
TV Status & Clock Display
JUST 12:34PM CH 12
30
STEREO
SAP
MONO
12
3
4
5
1
Picture (Aspect) Mode
2
Current Time
3
Channel
4
Receivable Broadcast Types (see right)
5
Sleep Timer time remaining
Channel & Aspect Display
When you change channels or picture (aspect) mode, the
channel number or picture mode will be displayed.
The following are possible audio broadcast types and on-screen
displays.
1 Press DISPLAY to display the broadcast signal
being received.
MTS Stereo broadcast:
Multi-channel Television Sound Stereo broadcast. Select
STEREO audio mode.
• If stereo broadcast is weak and the display flickers, select
MONO audio mode for possible improvement.
SAP broadcast:
Secondary Audio Program (sub language).
Select SAP audio mode for the sub language.
MONO broadcast:
Normal monaural sound broadcast.
MTS Stereo and SAP broadcast:
Multi-channel Television Sound Stereo (main language) and
Secondary Audio Program (sub language) broadcasts are being
received simultaneously. Select the STEREO or SAP audio
mode.
1 Press AUDIO to select the desired audio mode as
described above.
• Each press of AUDIO will change the audio mode as shown below.
< Example >
Equipped with -TV Noise Reduction for true MTS
reproduction.
-TV Noise Reduction is required for good
stereo separation and audio fidelity.
is a registered
trademark, and is licensed by
Technology Licensing.
Audio Mode for TV Viewing
Receivable Broadcast Types
NORMAL
STEREO
SAP MONO
STEREO
SAP MONO
JUST 12:34PM CH 12
STEREO
SAP
MONO
JUST 12:34PM CH 12
STEREO
SAP
MONO
JUST 12:34PM CH 12
STEREO
SAP
MONO
JUST 12:34PM CH 12
STEREO
SAP
MONO
FULL 12:34PM COMPONENT