Filter
Top Products
When adding appliances or
changing the connections of
appliances
If you have connected additional appliances or changed the
connections after the initial installation, you need to tell the
DVD recorder system to which socket on the rear of the
DVD recorder system the appliance is connected.
After changing the connection of the TV e
1 Press AUDIO MENU to enter the audio menu.
2 Press 4 repeatedly to select INPUTS, then press 2.
3 Turn SOURCE on the DVD recorder system or keep TV on
the remote control pressed for 1 second.
➜ e and AUDIO -> are displayed.
4 Press 4 repeatedly to select
➜ EXT1 if you connected the TV to EXT 1 only
(no digital audio connection between the TV and the
DVD recorder system),
➜ DIG if you connected the digital coaxial output of the TV
to DIGITAL IN,
➜ OPT if you connected the digital optical output of the TV
to OPTICAL IN on the DVD recorder system.
5 Press OK to store the setting.
6 Press AUDIO MENU to exit the audio menu.
After changing the connections of the VCR j,
satellite receiver i or game console r
1 Press AUDIO MENU to enter the audio menu.
2 Press 4 repeatedly to select INPUTS, then press 2.
3 Turn SOURCE on the DVD recorder system or use the
source keys on the remote control to select the VCR,
satellite receiver or game console.
➜ AVAILABLE and YES or NO are displayed.
4 If the appliance is not connected to the
DVD recorder system:
Press 4 repeatedly to select NO, then press OK.
➜ STORED is displayed.
If the appliance is connected to the DVD recorder
system:
Press 4 repeatedly to select YES, then press OK.
➜ VIDEO -> is displayed.
Press 4 repeatedly to select
➜ EXT1 if you connected the appliance to EXT 1,
➜ EXT2 if you connected the appliance to EXT 2,
➜ NONE if you did not connect the appliance to EXT 1 or
EXT 2 on the DVD recorder system.
Press OK to confirm.
➜ AUDIO -> is displayed.
Press 4 repeatedly to select either
➜ EXT1 or EXT2 if you connected the appliance to EXT 1
or EXT 2 only (no digital audio connection between the
appliance and the DVD recorder system),
➜ LIN1 or LIN2 if you connected the audio output of
the appliance to LINE IN 1 or LINE IN 2 (available only if
you selected VIDEO ->NONE),
➜ DIG if you connected the digital coaxial output of the
appliance to DIGITAL IN,
➜ OPT if you connected the digital optical output of the
appliance to OPTICAL IN on the DVD recorder system.
Press OK to store the settings.
➜ STORED is displayed.
5 Press AUDIO MENU to exit the audio menu.
System settings
18
English
TV
CDR/TAPE
CAM 1/2
CD
TUNER
SAT
MENU
VCR/GAME
DVD/MON
REC/OTR
SELECT
AUDIODISC
É
É
0
OK
H
1
3
2
4
6
5
79
8
SYSTEM
2
É
É