Filter
Top Products
Editing the name of the recording
After the recording has been made, you can change the
name of the recording.
1 Press STOPÇ when playback is stopped or press
DISC MENU on the remote control during playback.
2 Press 4 or 3 on the remote control as often as necessary
to select the desired title for editing.
3 Press 2 on the remote control to confirm the selection.
➜ The editing menu appears.
4 Press 4 or 3 on the remote control as often as necessary
to select the line Name.
5 Press 2 on the remote control to confirm the selection.
6 Use 1 or 2 on the remote control to move to the
character to be deleted or substituted.
➜ The character is highlighted.
7 Use 4 or 3 on the remote control to select a new
character, symbol or number.
00
To switch between upper and lower case press SELECT on
the remote control.
00
To delete a character press CLEAR on the remote control.
8 Repeat steps 6–7 until the name of the recording is
changed as desired.
9 Press OK on the remote control to confirm the new name.
➜ Storing name is displayed.
10 Press 1 on the remote control to exit the editing menu.
Erasing an entire recording/title
You can erase an entire recording/title from a DVD+RW or
an unfinalised DVD+R.The position of a deleted title on a
DVD+RW can be used for a new recording. However, a
deleted title on a DVD+R is only marked as deleted, but
not physically deleted.This means the deleted title will be
skipped during playback, but no new recording can be
made. Once the DVD+R has been finalised no further
changes can be made.
1 Press STOPÇ when playback is stopped or press
DISC MENU on the remote control during playback.
2 Press 4 or 3 on the remote control as often as necessary
to select the desired title for erasing.
3 Press 2 on the remote control to confirm the selection.
➜ The editing menu appears.
4 Press 4 or 3 on the remote control as often as necessary
to select the line Erase this title.
5 Press OK on the remote control to confirm.
➜ This will completely erase this title and Press
OK to confirm is displayed.
6 Press OK again on the remote control to erase the entire
recording/title.
➜ Erasing title is displayed.
➜ Afterwards Empty title (if you inserted a DVD+RW)
or Deleted title (if you inserted a DVD+R) is displayed
in the index picture screen.
Note: If the deleted title was shorter than 1 minute Empty
title or Deleted title will not be displayed.
00
To exit the editing menu without erasing press 1 on the
remote control.
Advanced features
48
English
MENU
REC MODE
DISC DISPLAY
CLEAR RETURNEDIT
PLAY MODE
TREBLE
TIMER
LOUDNESS
BASS
SUBWOOFER
REAR
NIGHT
VOICE
TV VOL
CHVOL
MUTE
SELECT
SURR.
+
-
AUDIODISC
É
É
É
0
OK
H
§
T/C
SURR.
2
;
∞
9
79
8
SYSTEM
É
Settings for title Philips 1
Name 2 Philips 1
Play full title
Erase this title
4
2