Filter
Top Products
L Searching by keying in a time
This function allows you to choose a specific position of the
playing time where playback is started.
1 Press SYSTEM MENU on the remote control during
playback to enter the system menu.
➜ The system menu bar appears.
2 Press 1 or 2 on the remote control as often as necessary
until L is selected.
3 Press 4 on the remote control to confirm the selection.
➜ Playback is paused.
➜ A time entry box appears in which the elapsed playing
time of the current disc is displayed.
4 Use the numerical keys on the remote control to key in the
desired hour, minutes and seconds of the playing time
where playback should start.
Note: If the selected title is shorter than the keyed in time
position, the digits start blinking. Key in a new time position.
5 Press OK on the remote control to confirm your selection.
➜ Playback is paused.
➜ The time entry box disappears and playback starts from
the selected time position.
00
To switch off the system menu bar press SYSTEM MENU
on the remote control.
Scan
This function allows you to play the first 10 seconds of
each chapter (DVD-Video discs) or track (CD) of the disc.
● Press PLAYMODE on the remote control as often as
necessary during playback until 6 is selected.
➜ The first 10 seconds of each chapter/track are played.
00
To end scanning and to resume normal playback press
STOP 9 and then PLAY/PAUSEÉÅ.
Repeat and playback in
random order
Depending on the disc type, you can select different types
of playback.
1 Select the desired chapter, title or disc and start playback.
2 Press PLAY MODE repeatedly on the remote control
during playback to select either (if available):
➜ 2:The current chapter is played repeatedly (on
DVD-Video discs only).
➜ 3:The current title is played repeatedly (on
DVD-Video discs only).
➜ 5:The entire disc is played repeatedly (on (Super)
Video CDs, audio CDs and MP3 CDs only).
➜ /: playback in random order (on audio CDs and
MP3 CDs only)
00
To return to normal playback press STOP 9 and then
PLAY/PAUSEÉÅ.
Repeating a specific sequence (not
on MP3-CDs)
You can mark a specific sequence within a title/chapter for
repeating.
1 Press ÉÅ on the remote control during playback to mark
the starting point of the sequence.
➜ The still picture shown is the selected starting point.
2 Press PLAY MODE repeatedly on the remote control until
0 is shown.
➜ The selected starting point is confirmed.
3 Press ÉÅ on the remote control.
➜ Playback continues.
4 As soon as the desired end point of the sequence is played,
press OK on the remote control.
➜ 1 is shown and the end point is confirmed.
➜ The entire selected sequence is played repeatedly.
00
To return to normal playback press STOP 9 and then
PLAY/PAUSEÉÅ.
Playback features
34
English
MENU
REC MODE
DISC DISPLAY
CLEAR RETURNEDIT
PLAY MODE
TREBLE
TIMER
LOUDNESS
BASS
SUBWOOFER
REAR
NIGHT
VOICE
TV VOL
CHVOL
MUTE
SELECT
SURR.
+
-
AUDIODISC
É
É
É
0
OK
H
§
T/C
SURR.
2
;
∞
9
79
8
SYSTEM
É