Filter
Top Products
100
Chapter 8
Customizing the Audio Source Setting AV
Adjusting source levels
SLA (source level adjustment) lets you adjust the
volume level of each source to prevent radical
changes in volume when switching between
sources.
• Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level with
the level of the source you wish to adjust.
2 Touch “SLA” in the AUDIO menu.
3 Touch “+” or “–” to adjust the source vol-
ume.
+4 — –4 is displayed as the source volume is
increased or decreased.
Sources are set to same source level adjust-
ment volume automatically.
• CD, MP3/WMA/WAV, M-CD
• EXT-1 and EXT-2
• AUX and AV
• XM and SIRIUS
Initial Settings
Adjusting initial settings
Initial settings lets you perform initial set up of
different settings for navigation unit.
(1) Function display
Shows the function names.
1 Touch the source icon and then touch
“SOURCE OFF” to turn source off.
When the source icon is not displayed, you
can display it by touching the screen.
2 Press the joystick and then touch
“INITIAL” to display the function names.
The function names are displayed and opera-
ble ones are selected.
To return to the previous display, touch
“BACK”.
To return to the display of each source, touch
“ESC”.
Switching the auxiliary setting
It is possible to use auxiliary equipment with nav-
igation unit as the one of source. Activate the
auxiliary setting when using auxiliary equipment
connected to AV INPUT terminal on the naviga-
tion unit.
1 Touch “AUX” in the INITIAL menu.
Touching “AUX” switches between “ON” and
“OFF”.
Setting the rear output and sub-
woofer controller
The navigation unit’s rear output (rear speaker
leads output and RCA rear output) can be used
for full-range speaker (REAR SP FULL) or sub-
woofer (REAR SP SUB. W) connection. If you
switch the rear output setting to the REAR SP
(1)
Initial Settings