Filter
Top Products
108
Appendix NAVI/AV
When the installation is complete, the open-
ing display appears.
6 Press the MAP button to change the navi-
gation screen.
Some time is needed until navigation is ready.
7 Check the details of the cautionary mes-
sage and touch “OK”.
8 To set the time difference, touch “+” or
“–”.
The time difference between the time origi-
nally set in the Navigation System (Pacific
Standard Time) and the current location of
your vehicle is shown. If necessary, adjust the
time difference. Touching “+” or “–” changes
the time difference display in one-hour incre-
ments. The time difference can be set from
+3 to –3 hours.
9 If necessary, set to summer time.
Daylight Saving Time (DST) is off by default.
Touch “Summer Time” to change the time if
you are in the daylight saving period. This
turns the display below summer time “On”.
10To complete the setting, touch “Back”.
The map of your surroundings appears.
This completes the setup of your Navigation Sys-
tem. Chapter 1 explains the basic operation of
your Navigation System.
➲ To change the time later ➞ Page 66
Time difference