Filter
Top Products
24
Chapter 1
Basic Operation NAVI/AV
How to listen to a CD
The built-in CD drive in the navigation unit ena-
bles you to listen to CDs and MP3/WMA/WAV
discs during navigation.
This section describes how to listen to a CD with
the built-in CD drive.
1 Press the OPEN/CLOSE button.
The LCD panel opens halfway, and the CD
loading slot appears.
2 Insert the CD to the CD loading slot.
The LCD panel closes automatically.
The audio CD set in the navigation unit is
played.
❒ Make sure the CD loading slot is empty
before inserting a CD into the slot.
❒ If you cannot insert a disc completely or if
a inserted disc is not recognized, check
that the label side of the disc is up. Press
CD EJECT button to eject the disc, and
check the disc for damage before inserting
the disc again.
❒ If the built-in CD drive does not operate
properly, an error message such as
ERROR-11 may be displayed.
➲ Error messages ➞ Page 121
3 Press the AV button to switch the Audio
screen.
Pressing the AV button switches between the
navigation map screen and the audio screen.
4 Press the VOL (+/–) button to adjust the
volume.
5 Touch the track you want to listen to in
the track list.
The selected track is played.
You can also skip backward or forward to
another track by moving the joystick left or
right. You can also use
or
touch
keys.
❒ If you touch or , you can switch the list
to the next page or the previous page.
❒ When no touch key is displayed, if you
touch the screen, the touch key is dis-
played.
6 To fast forward or reverse, keep touching
or
.
You can also perform fast reverse/fast forward
by holding the joystick left or right.
OPEN/CLOSE button
Information of Audio
Information of track being played
Track list