Filter
Top Products
62
Chapter 4
Editing the Navigation Utilities NAVI
Correcting the Installation
Angle
You can correct the installation angle of the navi-
gation unit. Even if the installation angle is not
facing the center, higher-accuracy sensor learn-
ing can be performed by correcting it. Select the
orientation of the LCD panel from the left, center,
and right.
1 Touch “Settings” in the Main menu, then
touch “System Options”.
2 Touch “Installation Angle Setup”.
3 Check the direction the LCD panel faces,
and touch the corresponding item.
Facing Left :
Select this when the angle is 5° or more to the
left from the center.
Facing Center :
Select this when the angle is less than 5° to
the left, and 5° or more to the right from the
center.
Facing Right :
Select this when the angle is 5° or more to the
right from the center.
❒ If the sensor status is “Simple hybrid”,
correcting the installation angle will not be
invalid.