Filter
Top Products
Chapter 3: Working with Target Servers
102
10. For the Broadcast Port, type the broadcast port number in the Port
field if you want to use a port other then 5000.
11. Select the Enable IPv6 Networking checkbox for IPv6 to enable IPv4
and IPv6 dual-stack operation.
Note: KSX II and KX II-101 devices are not IPv6 enabled, so this
section will not apply to those devices.
12. Select the Enable Logging checkbox only if directed to by Technical
Support. This option creates a log file in your home directory.
13. Click OK when finished. Click Apply any time while making
selections to apply it.
Upgrading Device Firmware
To update a device's firmware:
1. Connect to the device by highlighting the device's icon in the
Navigator.
2. Click Tools > Update > Update Device to perform firmware
upgrades.
3. You will be prompted to locate a Raritan firmware distribution file
(*.RFP format), which can be found on the Raritan website
(www.raritan.com) on the Firmware Upgrades page.
Ensure that you read all instructions included in Firmware Upgrade
Guide carefully before upgrading a device.
Note: Copy the firmware update file on the Raritan website to a local
machine before uploading. Do not load the file from a network drive.
Changing a Password
To update your password
1. Connect to a target by selecting it in the Navigator.