Filter
Top Products
Chapter 11: Command Line Interface (CLI)
218
Command Option Description
gw ipaddress Gateway IP address obtained from the
IP administrator
mode <auto | 100fdx> Set Ethernet Mode to auto detect or
force 100MB/s full duplex (100fdx)
Interface Command Example
The following command sets the IP address, mask, and gateway
addresses, and sets the mode to auto detect.
Admin Port > Config > Network > interface ipauto none
ip 192.168.50.12 mask 255.255.255.0 gw 192.168.51.12
mode auto
Listports Command
The Listports command lists the number of active users, user names,
port, and status.
Listports Command Example
Admin Port > listports
Port Port Port Port Port
No. Name Type Status Availability
1 - Dominion_KXII-101_Port KVM up idle
Userlist Command
The Userlist command lists the port, port name, port type, port status,
and port availability.
Userlist Command Example
Admin Port > Userlist
Active user number: 1
User Name | From | Status
-----------------------------------------------------
admin | Admin Port | active