Filter
Top Products
Chapter 2: Installation and Configuration
30
3. Launch the terminal emulation program you want to use to configure
the KX II-101.
4. Set the following port settings in the terminal emulation program:
Bits per second - 115200
Data bits - 8
Parity - None
Stop bits - 1
Flow control - None
5. Connect to the KX II-101. The login page opens.
6. Type the administrator user name and press Enter. You are
prompted to enter your password.
7. Type your password and press Enter. The Admin Port prompt
appears.
8. At the Admin Port > prompt, type config and press Enter.
9. At the Config > prompt, type network and press Enter.
10. To view the current interface settings, at the Interface > prompt, type
interface and press Enter. The current interface settings appear.