Filter
Top Products
Chapter 6: Device Management
142
Note: KX II-101 is enabled by factory default.
2. Select Enable SSH Access.
3. Type the network port used for SSH access to the KX II-101.
4. Click Save to save the setting.
Enabling Direct Port Access
Direct port access enables you to access the KX II-101 Remote Client
without having to go through the usual login page. With direct port
access enabled, you can define a URL to navigate directly to the Port
Access page.
To enable direct port access:
1. Choose Device Settings > Device Services. The Device Services
page opens.
2. Select the Enable Direct Port Access via URL checkbox.
3. Click Save to save the setting.
To define a direct port access URL:
• Define a URL with the IP address, user name, password, and if
necessary, port number of the KX II-101. If you have only one KVM
port, the port number is not needed.
The format for a direct port access URL is:
https://IP
address/dpa.asp?username=username&password=password&port=
port number