Filter
Top Products
Chapter 2: Installation and Configuration
19
Target Server
The KX II-101 can use either the included USB cable or integrated PS/2
cables to connect to the target server. Before connecting, configure your
target server's video to a supported resolution.
Note: For PS/2 configurations that require virtual media connectivity, the
USB connector is also necessary.
USB Configuration
To configure the KX II-101 for use with a USB target server:
1. Connect the mini-USB connector to the KX II-101 and the USB
connector to a USB port on the target server.
2. Use the attached video cable to connect the KX II-101 to the target
video port.
3. Use the optional PS/2 DKX2-101-LPKVMC cabling to attach only the
local video to the Local User port of the KX II-101. Optional
Note: The KX II-101 must be powered for the Local User port to
function.