Filter
Top Products
Chapter 11: Command Line Interface (CLI)
216
Debug
The Diagnostics > Debug menu enables you to choose the Setlog
command to set logging options for the KX II-101.
Setlog Command
The Setlog command enables you set the logging level for different
modules of the KX II-101 and to view the current logging levels for each
module. The syntax for the setlog command is:
setlog [module <module>] [level <level>] [vflag <vflag>]
[verbose <on|off>]
Set/Get diag log level
The Setlog command options are described in the following table.
Raritan Technical Support will tell you how to configure these settings.
Command Option Description
module The module name.
level The diagnostics level:
err
warn
info
debug
trace
vflag The type of verbose flag:
timestamp
module
thread
fileline
verbose [on|off] Turns verbose logging on and off.
Setlog Command Example
The following Setlog command sets the logging level to debug with
verbose logging on for the libpp_serial module.
Setlog module libpp_serial level debug verbose on
Configuration
The Configuration menu enables you to access the network commands
used to configure the network interface and set the device name.