Filter
Top Products
Chapter 6: Device Management
139
To reset to factory defaults:
• Click Reset to Defaults.
Network Basic Settings
1. Choose Device Settings > Network. The Network Settings page
opens.
2. Specify a meaningful Device Name for your KX II-101 device using
up to 16 alphanumeric characters, valid special characters, and no
spaces.
3. In the IP Address section, enter or select the appropriate network
settings:
a. Enter the IP Address if needed. The default IP address is
192.168.0.192.
b. Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
c. Enter the Default Gateway if None is selected from the IP Auto
Configuration drop-down.
d. Enter the Preferred DHCP Host Name if DHCP is selected from
the IP Auto Configuration drop-down.
Note: The recommended host name length is 80 characters.