Filter
Top Products
Chapter 6: Device Management
154
Trap Name Description
userPasswordChanged This event is triggered if the password of any user
of the device is modified.
userSessionTimeout A user with an active session has experienced a
session termination due to timeout.
vmImageConnected User attempted to mount either a device or image
on the target using Virtual Media. For every attempt
on device/image mapping (mounting) this event is
generated.
vmImageDisconnected User attempted to unmount a device or image on
the target using Virtual Media.
Port Configuration
The Port Configuration page displays a list of the KX II-101 ports. Ports
connected to KVM target servers or power strips are displayed in blue
and can be edited.
To change a port configuration:
1. Choose Device Settings > Port Configuration. The Port Configuration
page opens.
Sorting
This page is initially displayed in port number order, but can be sorted on
any of the fields by clicking on the column heading.
• Port Number - Numbered from 1 to the total number of ports
available for the KX II-101 device.
• Port Name - The name assigned to the port. A port name displayed
in black indicates that you cannot change the name and that the port
cannot be edited; port names displayed in blue can be edited.
Note: Do not use apostrophes for the Port Name.
Port Type - The type of target connected to the port: