Filter
Top Products
Chapter 6: Device Management
159
3. Click OK.
To cancel without saving changes:
• Click Cancel.
Managing Power Associations
To make power associations (associate power strip outlets with
the KVM target server):
Note: When a power strip is associated with the target server (port), the
outlet name is replaced by the port name. You can change this name in
the Port 2 page.
1. Choose the power strip from the Power Strip Name drop-down list.
2. Choose the outlet from the Outlet Name drop-down list.
3. Repeat steps 1 and 2 for each desired power association.
4. Click OK. A confirmation message appears.