Filter
Top Products
Chapter 3: Working with Target Servers
105
Note: If you want the application to autodiscover Raritan devices on the
new broadcast port you entered in the Options dialog, you must
configure all Raritan devices to use the new port number.
Remote Power Management
AC power to associated targets can be managed when used with a
properly configured Raritan Remote Power Control Strip (RPC strip).
Three options are available when performing remote target power
management:
• Power On
• Power Off
• Cycle Power
To change the power status of a target:
1. Select the device in the Navigator.
2. On the Tools menu, choose Power On, Power Off, or Cycle Power.