Filter
Top Products
Chapter 7: Managing USB Connections
168
Advanced USB Connection Settings
WARNING: It is possible, based on the selections you make in the
Advanced USB Connection Settings section, to cause configuration
problems between the KX II-101 and the target server. Therefore,
Raritan strongly recommends that you refer to the Known USB
Profiles (on page 169) or to the User Defined KX II-101 USB Profiles
Connection Configuration Table, which can be accessed by clicking its
corresponding link on the Advanced USB Connection Settings section
of the Port page .
To define advanced USB connections for the target server:
1. Click Device Settings > Port Configuration to open the Port
Configuration page. Click on the port you want to configure.
2. Click the
icon to expand the
section.
3. Click the User Defined KX II-101 USB Profile Configuration Table
link to access the recommended configurations to apply to the
Advanced USB Connection Settings section.
4. Configure the following as needed:
Virtual Media Interface #1 Type
Check the Remove Unused VM Interface #1 From Device
Configuration checkbox to remove the specified VM type
interface (for #1).
Virtual Media Interface #2 Type
Check the Remove Unused VM Interface #2 From Device
Configuration checkbox to remove the specified VM type
interface (for #2).