Filter
Top Products
Chapter 6: Device Management
144
USB - Forces the KX II-101 to use the USB connection to send
Keyboard and Mouse data to the host device.
PS/2 - Forces the KX II-101 to use the PS/2 connection to send
Keyboard and Mouse data to the host device.
Note: If you are using a Raritan switch on the front-end with a KX II-
101, you must set the Host Interface to PS/2 in order for the
configuration to work properly. See Analog KVM Switch (on page
162).
3. Click OK.
To reset to factory defaults:
• Click Reset To Defaults.
Serial Port Settings
Use the Serial Port Settings page to configure how the KX II-101
employs its integrated serial port.
Admin Port
To configure the admin serial port:
1. Choose Device Settings > Serial Port. The Serial Port Settings page
appears.
2. Select the Admin Port radio button, if it is not already selected (this is
the default factory setting).
Choose this option to connect to the KX II-101 directly from a client
PC and access the Command Line Interface through a program such
as Hyperterminal. See Command Line Interface (CLI) (on page
210).
3.
In the Serial Settings secti
on, configure the following fields:
Speed
Stop Bits
Data Bits
Handshake
Parity