Filter
Top Products
Function Keys
28
What can be done?
Quick access keys to customer pre-programmed adjustments. Almost any adjustment can be added to a func-
tion key. To program a function key, it is necessary to enter into the 'Service Menu'. To activate a function key,
just press the corresponding key.
The following functions are factory pre-programmed :
F1 = EYE-Q Touch up
F2 = Convergence Red on Green
F3 = Convergence Blue on Green
F4 = H & V Size
F5 = Color Balance
Ho
w to get an overview of the programmed keys?
1 Push the cursor keys or to select 'Function Keys' (menu 1).
2 Press ENTER to display an overview of the function keys (menu 2).
3 Press EXIT to return.
MAIN MENU
Image Control
Eye-Q
Function Keys
Service Menus
Select with or
then <ENTER>
<EXIT> to return
Service Menus
What can be done?
With the complete set of Service menus such as EYE-Q, Guide, Random Access, Installation and Service it is
possible to adjust the projector completely.
When entering the Service Menus, a warning will be displayed mentioning that only qualified Runco service
personnel may enter the Service menus.
Ho
w to enter the Service Menu?
1 Push the cursor keys or to select 'Service Menus' (menu 1).
2 Press ENTER to select. A warning will be displayed (menu 2). "Risk of incorrect adjustment of the
projector. The following SERVICE menus are reserved to and to be performed only by qualified
personnel! If qualified, press <ENTER> to continue, or if not, <EXIT> to return.
MAIN MENU
Image Control
Eye-Q
Function Keys
Service Menus
Select with or
then <ENTER>
<EXIT> to return
WARNING
RISK OF INCORRECTADJUSTMENT
OF THE PROJECTOR.
The following SERVICE menus are reserved to,
and to be performed only by qualified personnel !
If qualified, press
<ENTER> to continue, or
if not, <EXIT> to return.
FUNCTION KEYS
F1: EYE-Q Touch Up
F2: Convergence Red on Green
F3: Convergence Blue on Green
F4: H & V Size
F5: Color Balance
<EXIT> to return
menu 2menu 1
menu 1
menu 2
ADJUSTMENT MODE
Select a path from below:
EYE-Q
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 1
Select with or
then <ENTER>
<EXIT> to return
menu 3