Filter
Top Products
Notice On Safety
This equipment is built in accordance with the requirements of the international safety standards EN60950, UL
1950 and CSA C22.2 No.950, which are the safety standards of information technology equipment including
electrical business equipment.
These safety standards impose important requirements on the use of safety critical components, materials and
isolation, in order to protect the user or operator against risk of electric shock and energy hazard, and having
access to live parts.
Safety standards also impose limits to the internal and external temperature rises, radiation levels, mechanical
stability and strength, enclosure construction and protection against the risk of fire.
Simulated single fault condition testing ensures the safety of the equipment to the user even when the equip-
ment's normal operation fails.
4
SAFETY INSTRUCTIONS
Installation Instructions
Before operating this equipment please read this manual thoroughly, and retain it for future reference.
Installation and preliminary adjustments should be performed by qualified Runco personnel or by authorized
Runco service dealers.
Saf
ety Indication On The Product
The lightning flash with an arrowhead within a triangle is intended to tell the user
that parts inside this product may cause a risk of electrical shock to persons.
The exclamation point within a triangle is intended to tell the user that important
operating and/or servicing instructions are included in the technical documentation
for this equipment.
Owner’s Record
The part number and serial number are located at the back side of the projector. Record these numbers in the
spaces provided below. Refer to them whenever you call upon your Runco dealer regarding this product.
SERIAL NUMBER :
DEALER :
Safety Instructions
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL
!
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN