Filter
Top Products
SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
SET TO MIDPOSITION
UNDO R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
64
Undo R & B Convergence Mid
What can be done?
When "R & B convergence mid" is selected, all convergence settings are
set to their midposition. With the undo, it is possible to return to the
previous settings as long as the projector is playing on the same source
(= same adjustment block).
'Undo R & B convergence mid' is displayed in the Set Midposition menu
instead of 'R & B convergence mid' when this latter is pressed.
Ho
w to Undo?
1. Push the cursor key or to highlight 'Undo R & B
Convergence Mid' (menu 1).
2. Press ENTER execute the undo function.
menu 1
Green Convergence Mid
What can be done?
The green convergence settings can be set to midposition.
Only available when the projector is equipped with green convergence adjustments.
How to set Green settings to midposition?
1. Push the cursor key or to highlight 'Green Convergence Mid' (menu 1).
2. Press ENTER to select. A confirmation screen will be displayed first (menu 2).
3. Press ENTER to confirm.
Press EXIT to cancel the procedure to set the green convergence settings to their midposition.
menu 1
SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERT LINEARITY MID
DIG HOR LINEARITY MID
ASTIGMATISM MIDPOSITION
ALL SETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
menu 1
R & B CONVERGENCE MID
Convergence settings
in current block
will be overwritten!
<ENTER> to confirm
<EXIT> to cancel
!
menu 2
GREEN CONVERGENCE MID
Convergence settings
in current block
will be overwritten!
<ENTER> to confirm
<EXIT> to cancel
!
menu 2