Filter
Top Products
44
Note:
Only the green image is displayed while making top-
botton adjustments. The red and blue images will auto-
matically be corrected in the same manner.
Convergence corrections are automatically disabled for
the duration of these adjustments.
W
hich adjustment can be executed?
The following adjustments can be executed
- Horizontal centerline bow
- Horizontal centerline skew
- Top bow
- Top keystone
- Bottom bow
- Bottom keystone
Corrects for curvature of the vertical lines
in the middle of the image.
Corrects for tilting of the horizontal lines
in the middle of the image.
Corrects for curvature of the
horizontal lines on the upper side.
Corrects the keystone geometry correction
of the horizontal lines on the upper side.
Corrects the keystone geometry correction
of the horizontal lines on the lower side.
Connects for curvature of the
horizontal lines on the lower side
TOP-BOTTOM
H CENTERLINE BOW
H CENTERLINE SKEW
TOP BOW
TOP KEYSTONE
BOTTOM BOW
BOTTOM KEYSTONE
Select with or
then <ENTER>
<EXIT> to return
All adjustments are indicated on the screen with
the function name, a bar scale and a number
between 0 and 100. Adjust the next alignments
until the horizontal lines are straight.
Ho
w to enter an alignment?
To enter an alignment:
1. Push the cursor key or to highlight
a function
2. Press ENTER to activate this function.
3. Press EXIT to return.
Correct by pushing
the cursor key down
Correct by pushing
the cursor key up