Filter
Top Products
29
ENTERING THE SERVICE MENUS
Service Menus
What is available in the Service menus?
A complete set of adjustments divided in different modes are available to adjust the projector
The different mode are:
EYE-Q: to autoconverge the projector.
Guided : Guided should be selected if the user intends to perform a complete alignment of the projected image
and is not extensively familiar with the projector. All the necessary geometry and convergence adjustments are
executed in a predetermined sequence.
Random Access: Random Access should be selected if the user intends to make only a few adjustments or if
the user is highly qualified and knows the sequence of adjustments.
Installation: Installation should be selected if the projector has been relocated and/or a different screen size is
desired.
Service: Service should be selected if the user intends to change predefined settings.
Ho
w to enter the Service Menus?
1 Press the ADJUST key.
The projector displays the 'Main menu' (menu 1).
2 Push the cursor keys or to select 'Service Menus'
3 Press ENTER to select.
A warning will be displayed (menu 2).
4 If qualified, press ENTER to continue
The Service menus main menu will be displayed (menu 3).
MAIN MENU
Image Control
Eye-Q
Function Keys
Service Menus
Select with or
then <ENTER>
<EXIT> to return
WARNING
RISK OF INCORRECTADJUSTMENT
OF THE PROJECTOR.
The following SERVICE menus are reserved to,
and to be performed only by qualified personnel !
If qualified, press
<ENTER> to continue, or
if not, <EXIT> to return.
menu 1
menu 2
ADJUSTMENT MODE
Select a path from below:
EYE-Q
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 1
Select with or
then <ENTER>
<EXIT> to return
menu 3